Follow these easy steps to get your AEG F88010IM Dishwasher up and running in no time.
Carefully remove the dishwasher from its packaging. Make sure that all packaging materials, including protective films and tapes, are removed from the appliance before installation.
Install the dishwasher in a location that is close to existing water and electrical connections. Ensure the appliance is level by adjusting the feet. A level unit is essential for proper operation.
Connect the water inlet hose to a cold water tap with a 3/4 inch thread. Make sure all connections are tight to prevent leaks. If necessary, use the included gasket to ensure a secure fit.
Attach the drain hose to a standpipe or sink trap. Ensure the drain hose is not kinked or bent to allow free flow of water. The connection should be secure to prevent leaks.
Plug the dishwasher into an appropriate electrical outlet. Ensure the power supply is adequate and complies with local safety regulations. Do not use extension cords.
Before using the dishwasher for the first time, fill the salt reservoir with dishwasher salt to soften the water, and add rinse aid to the dispenser for effective drying.
Arrange your dishes in the dishwasher according to the manufacturer's loading instructions. Use the adjustable racks and supports to accommodate different types of dishes.
Use the control panel to select the desired wash program. Refer to the program chart to choose the appropriate cycle based on the load and soil level.
Run a test cycle without dishes using a small amount of detergent to ensure the dishwasher is functioning correctly. Check for leaks and proper drainage during the cycle.
Once the test cycle is complete, check the interior for any signs of water leakage or improper installation. Make any necessary adjustments before regular use.