The Bosch WTMC3321US Dryer has some known problems that occur often. Here are some easy to do solutions for the problems or error codes your Bosch might be giving you.

1. StaWStop indicator light does not illuminate

Fault in program sequence or malfunction.

2. WrinkJeblock indicator lights

The display shows '000'.

3. Lint filter LED is blinking

This is not an indication of a problem.

4. E:O1 warning signal

Program has been interrupted. Degree of drying has not been reached or the drying time is too long.

5. E:03 display indication

The temperature of the drying process is reduced, the drying time is extended.

6. No program selected

The 'Start/Stop' button not pressed or door not closed.

7. Drum light does not function

Possible causes: lightbulb defective or burned out, no power supply, lightbulb is loose.

8. Exhaust air duct is blocked or too long

This may cause the dryer to not function properly.

9. Room or cabinet is not adequately ventilated

This may affect the drying process.

10. Motor limit temperature exceeded

This can occur if the maximum drying time was exceeded.

Back to Home

Bosch WTMC3321US

;