Follow these easy steps to get your Electrolux ZDE57140W Dryer up and running in no time.
All transit bolts and packing must be removed before using the appliance. Slide out the polythene bag with the polystyrene stuffing before using the appliance. Pull off adhesive strips from inside the machine on top of the drum.
Ensure the machine is placed on a firm, level surface to minimize vibration and noise. Do not restrict the floor clearance through deep-pile carpets, strips of wood, or similar, as this might cause heat build-up and interfere with the appliance's operation. The appliance must not stand on the electrical supply cable.
Ensure that the electrical connections comply with the installation instructions. Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
Depending on the position of the tumble dryer to an outside wall, there is a choice of three vent outlets: one at the back, the others on the left or right-hand side. Connect the hose to whichever is more convenient by pulling the ring nut from the vent outlet at the back, screwing it on to the hose, and pushing it firmly back into place.
Remove the polystyrene block and any material from the drum. Before using your tumble dryer for the first time, place a few damp cloths inside the appliance and dry them for 30 minutes to remove any dust inside a brand-new tumble dryer.
Once in its permanent operating position, check that the dryer is absolutely level with the aid of a spirit level. If it is not, raise or lower the feet until it is. If the machine is situated on a carpeted floor, adjust the feet to allow air to circulate freely.
Ensure there are no obstructing items or material near the air-intake louvres at the back. Make sure the appliance is not pressing or standing on its electrical supply cable, inlet hose, and drain hose. Plug in at the mains socket and check the fuse in the fuse box.