Follow these easy steps to get your Hoover S5675 Vacuum Cleaner up and running in no time.
Carefully remove the vacuum cleaner from its packaging. Keep the packaging materials until you have verified that all components are present and functioning.
Ensure that the motor module is safely positioned. Attach the motor exhaust and securely connect it to the pipe inlet. Make sure all connections are tight to prevent any air leaks.
Attach the dust container to the motor module. Ensure it is properly aligned and locked into place to prevent dust leakage during operation.
Position the filtration module correctly and make sure it is securely attached. This will ensure optimal filtration performance.
Route the tubing to the canister and insert it into the canister inlet no more than 2-1/2 inches. Secure this connection with a gear clamp to ensure it is well-tightened.
Connect the low voltage wires to the canister. Plug the unit into a properly grounded outlet. Ensure all electrical connections are secure to avoid any hazards.
If the wall inlet valves are connected, the system is ready for use. Insert the hose end into any wall inlet valve and ensure that the Power Canister starts correctly.
For operation, insert the hose into the utility valve. The Power Canister can be turned ON and OFF using the switch on the motor module. Ensure the switch is left in the OFF position when not in use.