Follow these easy steps to get your Hotpoint FF7190EX Refrigerator up and running in no time.

1. Positioning and Connection

Place the appliance in a well-ventilated, humidity-free room. Ensure that the rear fan grills are not obstructed to allow the compressor and condenser to give off heat efficiently.

2. Installation

Set the FREEZER OPERATION knob to the initial setting. Insert the plug into the socket and ensure that the green POWER indicator light illuminates. Turn the REFRIGERATOR OPERATION knob to an average value. After a few hours, you can start placing food into the refrigerator.

3. Starting the Appliance

Before starting, clean the compartments and accessories with lukewarm water and bicarbonate. The appliance features a motor protection control system which starts the compressor about 8 minutes after switching on. This delay will also occur if there is a power cut.

4. Temperature Adjustment

Adjust the temperature using the REFRIGERATOR OPERATION knob for optimal energy-saving levels. Use the SUPER FREEZE button for rapid freezing if needed.

5. Avoiding Air Blockage

To prevent blocking air circulation inside the freezer, do not obstruct the ventilation holes with food or containers.

6. Electrical Connections

After transporting the appliance, place it vertically and wait at least 3 hours before connecting it to the electricity mains. Ensure the appliance is earthed and the plug is compliant with regulations.

Hotpoint FF7190EX

;