The Hotpoint RFA52S Refrigerator has some known problems that occur often. Here are some easy to do solutions for the problems or error codes your Hotpoint might be giving you.

1. The internal light does not illuminate

The internal light of the appliance fails to turn on when the door is opened.

2. The door is not closed properly or is continuously opened

The appliance door is either not shut completely or is being frequently opened, causing cooling inefficiency.

3. The outside ambient temperature is very high

The ambient temperature around the appliance is higher than the appliance's operating limits, affecting its performance.

4. The thickness of the frost exceeds 2-3 mm

A significant build-up of frost inside the freezer compartment is detected.

5. The appliance has not been installed on a level surface

The appliance is placed on an uneven surface, which may cause operational issues.

6. The appliance has been installed between cabinets that vibrate and make noise

Vibrations from surrounding cabinets cause noise when the appliance operates.

7. The internal refrigerant makes a slight noise even when the compressor is off

A slight noise from the refrigerant may be heard even when the compressor is not running.

8. The water discharge hole is blocked

The water discharge hole inside the appliance is obstructed, preventing proper drainage.

Back to Home

Hotpoint RFA52S

;