Follow these easy steps to get your LG F1480YD(1~9) Dryer up and running in no time.

1. Unpacking the Washer

Remove the cardboard box and styrofoam packing. Lift the washing machine and remove the base packing.

2. Position the Washer

Place the washer on a level floor with an allowable slope under the entire washer of 1 degree. Ensure there is additional clearance of 10cm at the rear and 2cm on both sides.

3. Install the Inlet Hoses

Connect the inlet hose to the water tap. Ensure the hose is securely tightened to prevent leaks.

4. Connect the Drain Hose

Securely connect the drain hose to prevent any water leaks during operation.

5. Level the Washer

Adjust all four feet using the transit bolt spanner provided, ensuring the appliance is stable with a clearance of approximately 20mm between the top of the washer and the underside of any work-top.

6. Electrical Connection

Ensure that the power outlet is within 1.5 meters of either side of the washer location. Do not overload the outlet with more than one appliance.

7. Initial Power On

Press the Power button to turn on the washer.

8. Select a Cycle

Choose a preferred wash cycle. Refer to the manual pages 19-21 for detailed cycle options.

9. Add Detergent

Add the appropriate amount of detergent and fabric softener for your selected cycle. Refer to the manual pages 29-30 for detailed instructions.

10. Start the Wash Cycle

Press the Start/Pause button to initiate the wash cycle. Select additional options as needed.

11. Post Cycle Care

After the cycle is complete, leave the door open to allow the washer door opening, flexible gasket, and door glass to dry.

Back to Home

LG F1480YD(1~9)

;