Follow these easy steps to get your LG WF-7806WRD Dryer up and running in no time.
Remove the cardboard box and styrofoam packing. Lift the washing machine and remove the base packing.
Place the washer on a level floor with an allowable slope under the entire washer of 1 degree. Ensure there is additional clearance of 10cm at the rear and 2cm on both sides.
Connect the inlet hose to the water tap. Ensure the hose is securely tightened to prevent leaks.
Securely connect the drain hose to prevent any water leaks during operation.
Adjust all four feet using the transit bolt spanner provided, ensuring the appliance is stable with a clearance of approximately 20mm between the top of the washer and the underside of any work-top.
Ensure that the power outlet is within 1.5 meters of either side of the washer location. Do not overload the outlet with more than one appliance.
Press the Power button to turn on the washer.
Choose a preferred wash cycle. Refer to the manual pages 19-21 for detailed cycle options.
Add the appropriate amount of detergent and fabric softener for your selected cycle. Refer to the manual pages 29-30 for detailed instructions.
Press the Start/Pause button to initiate the wash cycle. Select additional options as needed.
After the cycle is complete, leave the door open to allow the washer door opening, flexible gasket, and door glass to dry.