Follow these easy steps to get your Samsung NV75J5170BS Oven up and running in no time.
Installation of this oven must be performed only by a licensed electrician. The installer is responsible for connecting the appliance to the mains power supply in observance of the relevant safety recommendations.
Plug the oven into an electrical socket. Ensure proper connection with BROWN or BLACK for live, BLUE or WHITE for neutral, and YELLOW and GREEN for earth.
If installing the oven in a built-in cabinet, make sure the cabinet's plastic surfaces and adhesive parts are resistant up to 90 °C, and adjacent furniture is resistant up to 75 °C. Ensure vents for ventilation and leave a gap of at least 5 mm between the oven and each side of the cabinet.
Fit the oven into the cabinet and fix it firmly on both sides using 2 screws. After installation, remove the protective film, tape, and other packing material, and take out the provided accessories from inside the oven.
When you power on the oven for the first time, the default time of '12:00' appears on the display. Set the current time by following the on-screen instructions.
Before using the oven for the first time, clean the inside of the oven to remove the new oven smell. Run the oven on convection mode at maximum temperature for an hour.
For first-time use, clean the accessories thoroughly with warm water, detergent, and a soft clean cloth. Insert the accessory to the correct position inside the oven.