Follow these easy steps to get your Samsung RB2044SL Refrigerator up and running in no time.
You are advised to clean the appliance and accessories before switching the appliance on for the first time to remove any dust that accumulated during packing and shipping. Please clean the water dispenser (select models only) with a detergent, especially if there is an odor.
Switch on the appliance for approximately 2 hours before loading it with frozen food for the first time. It is recommended that you wait for the appliance to cool for 2-3 hours before storing food in it.
If the front of the appliance is slightly higher than the rear, the door can be opened and closed more easily. If the appliance is not level, there may be unusual noises and poor cooling. Turn the left adjusting leg in the direction of the arrow with a flat head screwdriver until the appliance is level. Similarly, adjust the right leg if needed.
Wait for at least one hour before plugging the appliance in. Plug the refrigerator/freezer into a wall socket used exclusively by this appliance. Ensure it is properly grounded.
Install all shelves and compartments removed during transport and place them in the correct position.
Press the freezer temperature button repeatedly to change the temperature between -14°F and 8°F. For the refrigerator, press the temperature button repeatedly to change the temperature between 34°F and 46°F.
Use the Power Freeze button to speed up the freezing process in the freezer, and the Power Cool button to speed up the cooling process in the refrigerator. Press the button again to cancel these modes.