Follow these easy steps to get your Samsung RR** Refrigerator up and running in no time.
Ensure sufficient air exhaust at the refrigerator base and at the back wall. Do not cover air vent openings. Check that the floor can support the fully loaded refrigerator.
Allow clearance to the right, left, back, and top when installing. This helps to reduce power consumption. Do not install the refrigerator in a place with temperatures lower than 10°C.
Keep the distance between the refrigerator and the freezer about 5~7mm. Remove the front leg cover on both the refrigerator and the freezer by removing the screws.
Connect the power plug in the proper position with the cord hanging down. Avoid using a cord that shows cracks or abrasion damage along its length or at either end.
If the appliance tilts to the left, adjust the left leg. If it tilts to the right, adjust the right leg until the appliance is level.
Place the front leg cover back on both products. Join the bottom fixer B with screws at the back of the products to secure them.