Follow these easy steps to get your Samsung RSG307** Refrigerator up and running in no time.
Carefully remove all packaging materials and the tape that secures the accessories inside and outside the refrigerator. Make sure to check for any damage that may have occurred during shipping.
Place the refrigerator in a well-ventilated area away from direct sunlight and heat sources. Ensure that there is enough space around the refrigerator for proper ventilation—at least 2 inches from the back wall and 1 inch on each side.
Adjust the leveling legs located at the front of the refrigerator to ensure that it stands level. Use a spirit level to check that the refrigerator is level from side to side and front to back.
Plug the refrigerator into a dedicated wall socket. Make sure that the electrical outlet provides the correct voltage as indicated on the refrigerator’s rating label.
Set the initial temperature of the fridge and freezer compartments using the control panel. The recommended temperature settings are 37°F (3°C) for the refrigerator and 0°F (-18°C) for the freezer.
Connect the refrigerator to the water supply if your model has a water and ice dispenser. Follow the instructions for connecting the water line and ensure there are no leaks.
If your refrigerator includes an ice maker, allow it 24 hours to produce ice after installation. Discard the first few batches of ice cubes to ensure the water line is clean.
Arrange the shelves and bins in the refrigerator to fit your storage needs. Ensure that air vents inside the refrigerator are not blocked by food items.
Perform a final check to ensure the refrigerator is functioning correctly. Listen for any unusual noises and check that the interior light turns on when the door is opened.