Follow these easy steps to get your Samsung SMH9207ST/XAA Oven up and running in no time.
Before beginning the setup, ensure the oven is unplugged to avoid any electrical hazards. Always handle components carefully to prevent damage.
Verify that AC voltage is available and present in the microwave oven. Check the input voltage at the Noise Filter PCB Assy and ensure ≈ 120VAC is available on both the input and output connectors of the PCB.
Pour 275±15cc of water at 20±5°C (68±9°F) in a 600cc beaker and place it in the center of the oven. Start the oven and measure the leakage using a microwave energy survey meter. Measured leakage must be less than 4mW/cm² after repair and adjustment; the maximum allowable leakage is 5mW/cm².
Place the microwave oven on a stable, flat surface. Ensure there is sufficient clearance around the oven for ventilation. Follow the manufacturer's guidelines for positioning to avoid overheating.
After setting up, perform a test operation by heating a cup of water for about 1-2 minutes to ensure the microwave is functioning correctly.
Inspect all connections and ensure that the wiring is correctly routed and secured to prevent electromagnetic interference and potential faults.