Bonfix ⋅ Zanussi TRN132A Refrigerator

1. Unpacking and Inspection

Carefully remove the refrigerator from its packaging. Inspect the unit for any signs of damage during transit. Ensure all components are included as per the packing list. If there are any discrepancies or damages, contact the supplier immediately.

2. Positioning the Refrigerator

Place the refrigerator in a well-ventilated area away from heat sources such as ovens or direct sunlight. Ensure there is enough clearance around the appliance for proper air circulation. The refrigerator should be installed on a flat, stable surface.

3. Electrical Connection

Connect the refrigerator to a power supply that matches the specifications on the rating label. Ensure the electrical outlet is properly grounded to prevent electrical hazards. Do not use extension cords or multi-socket adapters.

4. Water Drain Connection

Connect the water drain hose to the appropriate outlet. Ensure the hose is securely attached and leads to a proper drainage system to prevent water accumulation and potential damage.

5. Adjusting the Feet

Adjust the height of the stainless steel feet to ensure the refrigerator is level. This will ensure proper door alignment and prevent any operational issues.

6. Internal Setup

Install the provided shelves and grids according to your storage needs. Ensure they are securely placed to prevent any movement during operation.

7. Initial Power-On

Turn on the refrigerator and set the desired temperature using the control panel. Allow the unit to run empty for a few hours to reach the set temperature before loading it with products.

8. Loading the Refrigerator

Place food items inside the refrigerator, ensuring there is adequate space for air circulation. Avoid overloading the unit to maintain optimal cooling performance.

9. Final Checks

Verify that the doors close properly and that there are no unusual noises during operation. Check the temperature periodically to ensure it remains consistent with the set parameters.