Follow these easy steps to get your Zanussi ZBA15020SV Refrigerator up and running in no time.
Unpack the appliance and check if there are any damages on it. Do not connect the appliance if it is damaged. Report possible damages immediately to the place you bought it.
This appliance can be installed in a dry, well-ventilated indoor location such as a garage or cellar. For optimum performance, install the appliance where the ambient temperature corresponds to the climate class indicated on the rating plate.
Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to your domestic power supply. The appliance must be earthed. Follow the instructions given in specific paragraphs for electrical connections.
It is advisable to wait at least four hours before connecting the appliance to allow the oil to flow back into the compressor.
Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap, then dry thoroughly to remove the typical smell of a brand-new product.
Insert the plug into the wall socket. Turn the Temperature regulator clockwise to a medium setting to switch on the appliance.
The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired. Gradually pull the shelf in the direction of the arrows until it comes free, then reposition as required.
Adequate air circulation should be around the appliance. Wherever possible, the back of the product should be against a wall to avoid touching or catching warm parts (compressor, condenser) to prevent possible burn. The appliance must not be located close to radiators or cookers.