Follow these easy steps to get your Zanussi ZBA32050SA Refrigerator up and running in no time.
Unpack the appliance and inspect it for any damages. Do not connect the appliance if it is damaged. Report possible damages immediately to the place of purchase.
Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap to remove the typical smell of a brand-new product, then dry thoroughly.
Install the appliance in the niche by pushing it in the direction of the arrow until the upper gap cover stops against the kitchen furniture. Adjust the appliance so that the distance between the appliance and the cupboard front-edge is 44 mm and ensure there is a 4 mm clearance between the appliance and the cupboard.
Ensure there is sufficient airflow behind the appliance with a minimum of 200 cm2 ventilation area.
Carefully follow the instructions for electrical connection. Ensure the mains cable can move freely and that the supply voltage matches the rating plate.
Attach the appliance to the niche using 4 screws. Install the vent grille and attach the covers to the lugs and hinge holes.
Insert the plug into the wall socket. Touch the temperature regulator button if all LEDs are off. To switch off, keep touching the temperature regulator button for 3 seconds until all indicators are off.
Touch the temperature regulator button until the LED corresponding to the required temperature lights up. The selection varies from 2 to 8°C.