Follow these easy steps to get your Zanussi ZDC37202W Dryer up and running in no time.
Carefully read the supplied instructions before the installation and use of the appliance. Ensure you understand the safety precautions to prevent injuries and damages.
Remove all transport packaging components before use. Open the loading door, pull off adhesive strips from inside the machine on top of the drum, and remove the foil hose and polystyrene padding.
Make sure the appliance is installed on a flat, stable, heat-resistant, and clean surface. Ensure air circulation between the appliance and the floor, and that the rear surface is against the wall. Use a spirit level to check if the appliance is fully level.
Connect the mains plug to the mains socket only at the end of the installation, ensuring there is access to the mains plug after installation.
Ensure good ventilation in the installation room to avoid backflow of gases into the room from appliances burning other fuels, including open fires.
Clean the tumble dryer drum with a moist cloth. Ensure you have read all instructions for proper use and maintenance.
Prepare the laundry and load the appliance, making sure no laundry catches between the door and the rubber seal. Set the correct programme and options for the type of load, then press the Start/Pause button.
When the programme is completed, an intermittent acoustic signal will operate, and the indicators for Drying, End/Anticrease, Filter, and Tank will come on.