Most common
problems & fixes

Is your Electrolux 911239008 letting you down? Don't worry, we're here to help. Check out our list of the most common problems and how to fix them yourself.

The door of the dishwasher is not closed properly

The door was not shut completely

Ensure the door is fully closed and latched

Dishes are still dirty after washing

Wrong wash programme selected or improper loading

Select the appropriate wash programme and ensure proper loading

Dishwasher does not start

Mains plug is not plugged in or defective house fuse

Insert mains plug or replace house fuse

Dishes have scale deposits

Special salt container is empty or water softener incorrectly adjusted

Refill special salt container and adjust water softener

View all problems & fixes

Quick setup

Follow these easy steps to get your Electrolux 911239008 Dishwasher up and running in no time.

1

Check for Transport Damage

Before installation, inspect the dishwasher for any transport damage. Do not connect a damaged appliance. In case of damage, contact your vendor immediately.

2

Installation Surface Preparation

Ensure the dishwasher is installed on a firm, level floor. Adjust as necessary to ensure stability.

3

Water Supply Connection

Connect the dishwasher to a hot water supply only if your hot water is not electrically heated. Tighten the threaded hose fitting by hand. Consider installing an additional tap or a two-way adapter for convenience.

View the rest of the steps

Eco-Friendly Dishwasher

Say goodbye to pre-rinsing! The Electrolux 911239008 saves water by determining the exact amount needed for each wash, making it both eco-friendly and wallet-friendly!

Pulse Wash Magic

Experience the magic of 'PULSE WASH'! This feature adjusts motor speed and spray pressure during the wash, ensuring your dishes come out sparkling clean every time.

Troubleshooting

The Electrolux 911239008 Dishwasher has some known problems that occur often. Here are some easy to do solutions for the problems or error codes your Electrolux might be giving you.

Fault Code C3

The leak prevention system has been triggered. Close the tap and contact customer service.

^ Indicator Illuminated

Reminder to check the filter in the dishwasher. Clean the filter, the indicator illuminates at regular intervals as a reminder.

Fault Code CS

The water inlet hose is not correctly laid. Check the hose installation.

More Troubleshooting

Installation Requirements

The Electrolux 911239008 Dishwasher can be installed as a built-in or free-standing appliance. When placed next to a cooker, a heat-insulating, non-flammable plate with aluminum foil should be mounted between the dishwasher and the cooker. If installed under a kitchen work surface, the original work surface must be removed.

Electrical Connection

Electrical connection details are provided on the rating plate inside the dishwasher door. Ensuring the correct connection is crucial for safety and appliance performance.

Control Panel Features

The control panel includes an ON/OFF switch and program buttons with LED indicators. The water softener button is used in combination with the ON/OFF switch for adjustment. It also includes a multi-display for settings.

Capacity and Dimensions

The dishwasher has a capacity of 12 place settings, including serving dishes. Its dimensions are 850 x 600 x 600 mm (H x B x D).

Maintenance

Regular cleaning of filters and proper loading of dishes enhance performance. It’s essential to follow the user guide for cleaning and maintenance to ensure longevity.

Water Connection

The dishwasher requires a water pressure between 1-10 bar and should be connected to the hot water supply only if the hot water is not electrically heated. Proper installation ensures efficient operation and prevents leakage.

Safety Instructions

The dishwasher should be transported upright and installed on a firm, level floor. Never sit or stand on the open door, as this may cause the appliance to tip over. For faults, shut off the water supply and unplug the appliance.

Economical and Ecological Dishwashing

The dishwasher is designed for efficient water and energy use. It includes a 'PULSE WASH' system that varies motor speed and spray pressure for better cleaning.

Error Messages and Troubleshooting

Error messages are displayed for troubleshooting. Users are encouraged to rectify minor faults using the instructions provided to avoid service charges.

Leak Prevention System

The dishwasher is equipped with an AQUA CONTROL SYSTEM that immediately interrupts water supply during a fault, activating the drain pump to prevent leaks.

Maintenance

Check out our tips to prevent many common issues and extend the life of your Electrolux Dishwasher.

Regular Cleaning

Ensure that the dishwasher filters are cleaned regularly to prevent blockages. Remove the filters and wash them under running water. Make sure to replace them securely to maintain performance.

Use Appropriate Detergents

Only use detergents specifically designed for dishwashers. Avoid using excessive detergent, as it can lead to residue or damage the appliance.

Check Water Softener

Adjust the water softener settings according to the hardness of your water to prevent limescale build-up. Refill the special salt container when needed.

Load Dishes Correctly

Ensure dishes are loaded properly, so they do not block the spray arms. Avoid overcrowding to ensure all items are adequately cleaned.

Avoid Using Harsh Cleaners

Do not use furniture care products or aggressive cleaners, as they can damage the dishwasher components. Use a damp cloth for wiping surfaces.

)

tech specs

Need more info? Please have a look at the tech specs of the watch. We’ve used Latest technology & quality materials

Technical Specifications

  • Capacity: 12 place settings including serving dishes
  • Permitted Water Pressure: 1-10 bar (10-100 N/cm2 or 0.1-1.0 MPa)
  • Electrical Connection: Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher door on the right
  • Appliance Type: Free-Standing Appliances
  • Dimensions: 850 x 600 x 600 mm (H x B x D)
  • Weight: 54 Kg

Electrolux 911239008 Dishwasher: A Blend of Efficiency and Innovation

The Electrolux 911239008 dishwasher stands as a testament to advanced engineering and thoughtful design, providing an exceptional dishwashing experience tailored to meet modern household needs. This built-in dishwasher is crafted to seamlessly integrate into your kitchen, offering both aesthetic appeal and high performance. Equipped with the innovative 'PULSE WASH' wash system, it intelligently adjusts motor speed and spray pressure throughout the wash cycle, ensuring impeccable cleaning results while optimizing water and energy consumption. This model prioritizes user convenience with its intuitive control panel and a range of customizable programs, making it suitable for various dishwashing requirements. The Electrolux 911239008 is engineered for reliability, featuring robust components that promise longevity and minimal maintenance, making it a valuable addition to any home looking to combine style with functionality.