Most common
problems & fixes

Is your Electrolux NEXUS-P6000 letting you down? Don't worry, we're here to help. Check out our list of the most common problems and how to fix them yourself.

Cycle interrupted. OFF/ON EH1

Power supply problems (incorrect/disturbance); PCB faulty.

Wait for frequency nominal conditions.

Cycle stops with door locked. RESET E32

Drain tube kinked/clogged/improperly positioned; Drain filter clogged/dirty; Drain pump faulty; Leaks from water circuit on pressure switch; Pressure switch; Wiring; Main PCB.

Cycle is paused.

START/RESET E12

Tap closed or water pressure too low; Drain tube improperly positioned; Water fill solenoid valve is faulty; Leaks from water circuit on pressure switch; Pressure switch faulty; Wiring faulty; PCB faulty.

Cycle is paused with door locked.

ON/OFF E5F

Defective inverter board, Defective wiring, defective main board.

Cycle stops with door locked (after 5 attempts).

View all problems & fixes

Quick setup

Follow these easy steps to get your Electrolux NEXUS-P6000 Dryer up and running in no time.

1

Unpacking the Dryer

Carefully remove the dryer from its packaging. Ensure that all packaging materials are properly disposed of and check for any visible damage before proceeding with installation.

2

Selecting the Installation Location

Choose a suitable location for your Electrolux NEXUS-P6000 Dryer. The area should be well-ventilated and free from dust and humidity. Ensure that the floor is stable and level to prevent vibrations and noise during operation.

3

Connecting the Power Supply

Plug the dryer into a grounded electrical outlet. Ensure the outlet voltage matches the specifications on the dryer’s rating plate. Do not use extension cords or adapters.

View the rest of the steps

Jet-System Magic

The NEXUS-P6000 features a Jet-System that creates a magical water circulation effect, ensuring your clothes come out cleaner than ever!

Eco-Ball Wizardry

With the Eco-Ball technology, the NEXUS-P6000 saves detergent during washing cycles, making it both eco-friendly and wallet-friendly!

Troubleshooting

The Electrolux NEXUS-P6000 Dryer has some known problems that occur often. Here are some easy to do solutions for the problems or error codes your Electrolux might be giving you.

E10

Water fill difficulty (closed tap) Ensure the water tap is open and water pressure is adequate. Check for any obstructions in the water supply line that may be restricting flow.

E20

Drain difficulty (dirty filter) Inspect and clean the drain filter. Make sure there are no blockages that could be preventing proper drainage.

E40

Door open Make sure the door is fully closed and securely latched before attempting to start a cycle. Check for any obstructions that might prevent the door from closing properly.

More Troubleshooting

Safety Precautions

Electrical appliances, including the Electrolux NEXUS-P6000 Dryer, must be serviced only by qualified service engineers. Always unplug the appliance from the power socket before touching internal components.

Temperature Control

Drying temperature is managed by an NTC sensor located on the duct, ensuring precise temperature control for optimal drying performance.

Alarms and Troubleshooting

The dryer uses LED indicators and an LCD to display alarms such as E10 for water fill difficulty, E20 for drain difficulty, and E40 for door open. Some alarms, like EF0 for water leakage, require service intervention.

Anti-Foam Control

The anti-foam control system utilizes an electronic pressure switch to manage spin phases, ensuring efficient operation even in the presence of foam.

Drying Control System

The NEXUS-P6000 features an automatic drying control system utilizing an NTC sensor to calculate the drying time. The drying function can be executed automatically after a washing cycle or as a separate program.

Memory System

The system includes an EEPROM memory module to store configuration data, cycle descriptions, appliance status during power failures, and alarms.

Drying Cycles

The appliance offers automatic and time-controlled drying cycles, with options for extra-dry, cupboard-dry, and iron-dry for cotton and synthetic fabrics.

Maintenance

Check out our tips to prevent many common issues and extend the life of your Electrolux Dryer.

Regular Cleaning

Clean the lint filter after every load to prevent lint buildup and ensure efficient drying. Remove any lint or debris from the filter and the surrounding area.

Inspect and Clean Venting System

Periodically check the dryer vent and exhaust duct for blockages or obstructions. Clean any lint buildup to prevent fire hazards and maintain optimal performance.

Check the Drum Seal

Inspect the drum seal for wear and tear. A damaged seal can cause air leaks and reduce drying efficiency. Replace if necessary.

Monitor Drying Sensor

Ensure that the drying sensor is clean and functioning correctly. A faulty sensor can lead to improper drying times. Clean with a soft cloth if needed.

Verify Electrical Connections

Ensure all electrical connections are secure and in good condition. Loose or damaged connections can lead to malfunctions.

)

tech specs

Need more info? Please have a look at the tech specs of the watch. We’ve used Latest technology & quality materials

Technical Specifications

  • Voltage: 230V - 240V
  • Power: 920+920 W
  • Heater Resistance: 56,5Ω+56,5Ω / 61,5Ω+61,5Ω
  • Fan Capacity: 80 m3/hour

Control System

  • Control Memory: EEPROM memory module
  • Microprocessor: External to memory module

Safety and Sensors

  • NTC Sensor Resistance: 5000Ω at 25°C
  • Manual-reset Safety Thermostat: Opens at 150°±5°C
  • Auto-reset Safety Thermostat: Opens at 110°±3°C, Closes at 94°±5°

Drying System

  • Drying Temperature Control: NTC Sensor
  • Humidity Control Sensor: NTC
  • Drying Heater: Included

Electrolux NEXUS-P6000: Innovative Washing Solutions

The Electrolux NEXUS-P6000 sets a new standard in the world of home laundry appliances. This advanced washing machine is designed with a keen focus on efficiency, technology, and user convenience, making it a perfect fit for modern households. Equipped with the innovative Jet-System and ECO-BALL technology, the NEXUS-P6000 ensures optimal washing performance while conserving water and energy. Its powerful three-phase asynchronous motor with inverter technology provides a quieter operation and reduces wear and tear, promising longevity. The machine's sleek TC3 styling offers a sophisticated look, coupled with a user-friendly control panel that features up to 21 programmable positions. With an impressive spin speed range of 600 to 1600 rpm and a variety of washing cycles, it caters to all fabric types and laundry needs. The Electrolux NEXUS-P6000 is not just a washing machine; it's a commitment to excellence in every wash.