The Bosch WTW84360GB Dryer has some known problems that occur often. Here are some easy to do solutions for the problems or error codes your Bosch might be giving you.

1. Start/Stop indicator lamp does not light up

The mains plug might not be plugged in or the program may not be selected.

2. Container indicator lamp and Start/Stop button are flashing

The condensation container is full.

3. Cln appears in the display panel

This is not an error. It indicates the automatic cleaning of the heat exchanger.

4. Dryer does not start

The Start/Stop button might not be selected or the door might not be closed.

5. Loud humming noise for several seconds

The condensation container might not be properly inserted.

6. Filter indicator lamp and Start/Stop button are flashing

The fluff filter requires rinsing.

7. Interior light is not working

The bulb might need replacing.

8. Unsuitable program selected

The selected program may not be suitable for the load.

9. Power failure

The dryer experienced a power failure.

10. Fine layer of limescale on the moisture sensors

The sensors may be covered with limescale.

11. Container indicator lamp flashes despite being emptied

There may be an issue with the filter in the condensation container.

12. Air inlet blocked

The air inlet might be obstructed.

13. Power failure

A power failure has occurred.

Back to Home

Bosch WTW84360GB

;