The Hoover RVC0011 Vacuum Cleaner has some known problems that occur often. Here are some easy to do solutions for the problems or error codes your Hoover might be giving you.

1. Too much dust in Dust Bin / Dust Sensor

The dust bin is filled with too much dust, or the dust sensors are detecting excessive dust.

2. Dust Bin not present / fitted properly

The dust bin is either missing or not installed correctly.

3. Agitator or Drive Wheel is obstructed / Side Brush is obstructed

There is an obstruction in the agitator, drive wheel, or side brush, preventing normal operation.

4. Power is on but Robot moves backwards or in circles

The robot is experiencing erratic movement despite being powered on.

5. Robot fails to display a green light when charging

The robot does not show a green light, indicating it might not be charging properly.

6. Remote Control is not working

The remote control fails to operate the robot.

7. Virtual Barrier is not working

The virtual barrier does not seem to prevent the robot from crossing.

8. Trapped Brushes Warning

The brushes are trapped, causing the robot to stop functioning.

9. Drive Wheel Warning

The drive wheel is caught or obstructed, causing the robot to stop.

10. Low Battery

The battery level is critically low, preventing the robot from operating.

Back to Home

Hoover RVC0011

;