Follow these easy steps to get your Hoover U5168-900 Vacuum Cleaner up and running in no time.
Begin by removing all parts from the carton and identify each item. You will need the upper handle screws, paper filter bag, and attachments like the hose, cleaning tools, crevice wand, and extension wand. Remove the bag door by pulling the bag door latch forward and setting it aside.
Remove the cardboard protector from the bottom of the bag compartment assembly. Align the opening in the bag with the dirt tube inside the bag compartment, and push the bag firmly onto the tube.
Insert the two screws at the front of the handle to secure it onto the assembly. Tighten the screws to ensure the handle is firmly attached.
Insert the hose connector into the bottom of the caddy. Drape the hose over the top and plug it into the opposite end until it snaps into place. Position the extension wand and place the crevice wand inside the extension wand. Position the dusting brush and furniture nozzle as shown in the manual.
Ensure the cleaner is not plugged in during assembly. With the opening of the bag assembly toward the front, place it down onto the extension on the cleaner base. Rock the handle side to side while pushing down firmly to secure it.