Follow these easy steps to get your Hoover VCC-07 Vacuum Cleaner up and running in no time.
Insert the flexible hose into the inlet on the main body of the vacuum cleaner. Turn the hose clockwise until it cannot be turned any further.
Fit the combination floor head by pushing onto the extension tube.
Insert the power plug into the electrical outlet. Ensure the vacuum cleaner is switched off.
Press the on/off button located at the rear of the machine to turn on and press the button again to turn the vacuum cleaner off.
After use, turn the vacuum cleaner off and unplug from the electrical outlet. Wrap the cord around the cable storage hook for storage.
There is a parking slot located on the side of the vacuum cleaner where the floor tool and hose can be parked for carrying and storage.
Unclip the retainer clip on the top of the vacuum cleaner and lift up to gain access to the dust bag compartment.
Lift out the full dust bag and dispose of it. Insert a new dust bag into the vacuum cleaner ensuring the seal ring covers the air entrance connector inside the housing.
Turn off the vacuum cleaner and unplug it from the electrical outlet. The HEPA pre-motor filter is found in the centre of the dirt container. Rotate the filter clockwise to remove, replace with a new filter, and turn the retaining disc clockwise to secure.