Follow these easy steps to get your Hotpoint FFU00 Refrigerator up and running in no time.
Do not install your appliance in a room where the temperature goes below 5˚C, as this will affect the appliance's performance. Ensure the power socket is in a readily accessible position, adjacent to the appliance.
If your access door is too narrow for the appliance, you may need to remove both the fridge and freezer doors to pass the appliance through. Follow the specific door removal instructions in the manual.
Connect your appliance to a cold water supply for the ice maker and cool water dispenser functions. Follow the plumbing installation instructions to properly install the feed water tube.
Level both doors by adjusting the left and right hand height adjusting screws to ensure efficient operation and proper closure.
Before using your appliance for the first time, wipe off any dust and clean thoroughly. Unpack and install accessories in their proper places to prevent possible transit damage.
When first installed, leave the appliance to stand in its final location for 2-3 hours to allow the refrigerant to settle before loading it with fresh or frozen foods.
Discard the first 20 pieces of ice and the first 7 glasses of water dispensed after installation to remove any particles from the feed water tube.