Follow these easy steps to get your Hotpoint HME40N Refrigerator up and running in no time.
Install the appliance in a fresh and well-ventilated room, away from direct sunlight and heat sources such as stoves. Ensure the room is humidity-free and the floor is level and rigid.
Make sure there is enough space around the refrigerator for air to circulate freely. This will help maintain efficient operation and energy conservation.
If the floor is not perfectly horizontal, adjust the refrigerator by tightening or loosening the rear feet to ensure the appliance is stable.
After positioning the refrigerator, wait at least 3 hours before plugging it into the electrical socket to allow the refrigerant to settle.
Ensure the appliance is earthed and the plug is compliant with the law. Verify that the socket can withstand the maximum power indicated on the data plate located on the appliance.
Before using the refrigerator for the first time, clean the compartments and accessories thoroughly with lukewarm water and bicarbonate of soda.
Insert the plug into the electrical socket. If 'OFF' appears on both indicator displays (refrigerator and freezer), switch on the appliance by holding down the ON/OFF button for at least two seconds.
The standard storage temperatures are set to +5°C for the refrigerator and -18°C for the freezer. Adjust these settings using the display if necessary.
Before placing any food inside, let the refrigerator run for a few hours to reach the desired cooling temperature.