Follow these easy steps to get your Hotpoint RLA52 Refrigerator up and running in no time.
Select a location for your fridge away from heat sources like cookers, radiators, or direct sunlight, as extreme temperatures will affect its performance. Ensure there is at least a 100mm (4 inches) gap between the top of the fridge and the ceiling or underside of a wall cupboard to allow for adequate ventilation.
Level the fridge by adjusting the front feet until firm contact is made with the floor. This action will prevent rocking or vibration and ensure the door is aligned, aiding in reliable and efficient operation.
Move the fridge into position using the sides of the cabinet. Take care to avoid damaging the refrigerant circuit pipework on the rear.
Make sure that ventilation openings are kept clear of obstruction. Allow a minimum of 30mm (11/4 inches) gap above the fridge for proper air circulation.
Let the appliance stand upright in its final location for at least 15 minutes before plugging in and switching on the electricity supply to allow the refrigerant to settle.
Ensure the fridge is earthed. The fridge must be positioned so that the plug is accessible after installation. After ensuring proper placement, plug in and switch on the fridge.
Adjust the temperature using the control wheel based on the location of the fridge, room temperature, and how frequently the door is opened. The normal set point is marked by a 3 and N on the dial. Turn the wheel clockwise for a colder setting and anti-clockwise for a warmer setting.
Allow the fridge to cool before placing food inside. All food should be covered when stored in the fridge.