Follow these easy steps to get your LG F14A8RD(1~9) Dryer up and running in no time.
Ensure the installation location is flat and hard. Avoid carpets or rugs that may impede air circulation. The washer must not be installed in rooms where the temperature can drop below 0°C.
Install the washer with a minimum clearance of 10 cm from the wall at the rear and 2 cm on each side. Ensure it is not positioned next to a gas cooker or coal burning stove without proper insulation.
The power outlet must be within 1.5 meters of the washer. Ensure the outlet is properly grounded. Do not modify the provided plug; consult an electrician if it doesn’t fit the outlet.
Use the spanner provided to adjust the leveling feet. Ensure the washer is level to prevent excessive vibration during use.
Attach the water supply hose to the water inlet. Ensure the hose is connected securely to prevent leaks. The permissible water pressure is 100 - 1000 kPa.
Position the drain hose to prevent water from flowing back into the washer. Ensure it is not kinked or obstructed.
Remove the transit bolts used for shipping. Retain these bolts for future use in case the washer needs to be relocated.
Plug the washer into the grounded power outlet. Ensure no other appliances are sharing this outlet to avoid overload.