Follow these easy steps to get your Samsung RS2556SH Refrigerator up and running in no time.
Ensure the entrance door is wide enough for the refrigerator to pass through. The required dimensions are as follows: Width: 36 inches, Height: 70 inches, Depth without door: 28 inches.
Choose a location with easy access to the water supply and avoid direct sunlight. Ensure enough space is available for air circulation.
Place the refrigerator in the selected location with reasonable clearance between the wall and the refrigerator. Ensure the plug is accessible after installation.
Level the refrigerator first. If the freezer door is lower than the refrigerator, insert a flat-blade screwdriver into the control lever and turn clockwise. If the freezer door is higher, follow the same steps to adjust.
If disassembling the freezer door, disconnect the water supply line first to avoid damage. Follow the instructions for separating the water supply line from the refrigerator.
Plug in the refrigerator and ensure the interior light comes on when the doors are opened. Set the temperature control to the coldest setting and wait for an hour to ensure the freezer begins to chill and the motor runs smoothly.
Set the freezer temperature between 8°F and -14°F, and the refrigerator temperature between 34°F and 46°F, using the respective temperature control buttons.
If newly installed, flush the water dispenser by discarding the first six glasses of water to remove impurities from the water supply system.
Ensure water pressure between 20 and 125 psi for proper operation. Discard the first few batches of ice to ensure cleanliness.