Follow these easy steps to get your Samsung RS265LA** Refrigerator up and running in no time.
Ensure the refrigerator can pass through entrance doors and is placed in a location with easy access to the water supply, away from direct sunlight, and on a level floor.
Place the refrigerator with reasonable clearance between the wall and the refrigerator, following installation instructions. Ensure it is properly installed and leveled.
Turn on the main water supply and shut-off the valve of the water supply line. Run water through the dispenser until the water runs clear for approximately 6-7 minutes.
If the freezer door is lower than the refrigerator, insert a flat-blade screwdriver into the slot of the control lever, turn it clockwise, and level the refrigerator.
Secure the front leg cover by turning the three screws clockwise.
Ensure the power plug is properly connected, and the interior light should come on when the doors are opened.
Set the temperature control to the coldest setting and wait for an hour to ensure the freezer gets slightly chilled and the motor runs smoothly.
Throw away the first six glassfuls of water from the dispenser or until water flows cleanly to flush out impurities.
Once the refrigerator reaches a sufficiently low temperature, you can begin storing food.