Follow these easy steps to get your Samsung SU-2930 Vacuum Cleaner up and running in no time.
Stand the vacuum upright and slide the base of the handle firmly into the grooves at the top of the vacuum body. Insert the screw provided into the existing hole. Tighten the screw securely with a screwdriver. Before securing the handle, please check that the handle is fitted to the vacuum body and make sure there’s no gap.
Slide the extension wand and the crevice tool together into the storage clip. Attach the Mini Turbo Brush by putting the rib at the bottom of the Mini Turbo Brush on two hooks of the Handle. Snap the Mini Turbo Brush into place as shown.
Line up the tabs on the base of the Twist Snap Hose with the corresponding notches on the hose collar as shown. Slide the end of the hose wand with tabs into the Hose Wand Base.
To turn the cleaner on, press the Power switch. To turn the cleaner off, press the Power switch again.
The handle of your cleaner has three positions; upright for storage and when using cleaning tools; operating for general operation on carpet and floors; low for reaching under low furniture. Step on the handle release pedal to lower the handle.
To move your cleaner from room to room, put the handle in the upright position, tilt the cleaner back on its rear wheels, and push forward.