Follow these easy steps to get your Zanussi ZRB634FS Refrigerator up and running in no time.
Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap to remove the typical smell of a brand-new product, then dry thoroughly.
Insert the plug into the wall socket. Turn the Temperature regulator clockwise to a medium setting.
The temperature is automatically regulated. To operate the appliance, turn the Temperature regulator toward lower settings to obtain the minimum coldness and toward higher settings to obtain the maximum coldness. A medium setting is generally the most suitable.
Ensure sufficient ventilation by following the installation instructions. Wherever possible, the back of the product should be against a wall to avoid touching or catching warm parts (compressor, condenser) to prevent possible burns.
The appliance must not be located close to radiators or cookers and should stand level. This can be achieved by adjusting the two adjustable feet at the bottom in front.
Frost is automatically eliminated from the evaporator of the refrigerator compartment every time the motor compressor stops, during normal use. Periodically clean the defrost water drain hole in the middle of the refrigerator compartment channel to prevent water from overflowing.
The freezer compartment of this model is a 'no frost' type, meaning it doesn't require manual defrosting.