Most common
problems & fixes

Is your AEG T37400 letting you down? Don't worry, we're here to help. Check out our list of the most common problems and how to fix them yourself.

The dryer is not working properly

Mains plug disconnected, no program selected, loading door open, faulty fuse or residual current circuit breaker

Plug in mains plug, select program, close loading door, check fuse or residual current circuit breaker

The drying results are not satisfactory

Wrong program selected, lint filter blocked, wrong filling quantity, laundry not pre-dried sufficiently

Select another program, clean lint filter, observe recommended filling quantity, pre-dry laundry

The drying cycle exceptionally takes a long time

Vented air transport disrupted, lint filter blocked, lint filter not installed

Straighten air venting hose, clean air venting ducts, clean lint filter, install lint filter

The loading door cannot be closed

Clothing or other items obstructing the door

Remove any obstructions and try closing the door again

View all problems & fixes

Quick setup

Follow these easy steps to get your AEG T37400 Dryer up and running in no time.

1

Check for Transport Damage

Inspect the dryer for any damage that may have occurred during transport. If you find any damage, do not connect the appliance and contact your dealer for assistance.

2

Select Installation Location

Ensure the dryer is installed in a room where the temperature does not fall below zero or exceed +35°C. The dryer should be leveled and not placed on a thick pile carpet to ensure proper air circulation through the ventilation slots.

3

Install Insulating Panel

If the dryer is installed near a gas, coal, or electric heater, place an insulating non-inflammable panel between the dryer and the heater. The panel should measure 85x57.5 cm.

View the rest of the steps

A Perfect Pair!

You can combine the AEG T37400 with any LAVAMAT washing machine to create a laundry dream team! Stack them up and save space while getting your clothes clean and dry in style.

Eco-Friendly Fluff!

Did you know? Only 0.03g of fluff per kilo is lost when you use the AEG T37400 dryer. That's like losing a single feather from a big fluffy pillow!

Troubleshooting

The AEG T37400 Dryer has some known problems that occur often. Here are some easy to do solutions for the problems or error codes your AEG might be giving you.

DRYING light flashing

The machine is performing the drying phase, but the Start button needs to be pressed again. Press the Start button to resume the drying programme.

COOLING light flashing

The appliance is in the cooling phase, but the Start button needs to be pressed again. Press the Start button to continue with the cooling phase.

END light flashing

Flashes at the end of the cooling phase and during the anti-creasing phase. No action needed if only light END flashes, as it indicates the anti-creasing phase has finished.

More Troubleshooting

General Operation

The AEG T37400 Dryer is a vented tumble dryer with various drying programs. It features an ON/OFF button to switch the appliance on and off, and a mains-on light that indicates when the dryer is active.

Drying Programs

The dryer offers both automatic and time-controlled drying programs. The program selector dial allows you to choose the appropriate setting based on the type and amount of laundry.

Safety Features

The dryer includes several safety features, such as child safety instructions and warnings about potential fire hazards with certain items, like those soaked in oil.

Troubleshooting

Common issues such as the dryer not starting or drying inefficiently can often be resolved by checking the mains plug, program settings, and ensuring the door is properly closed. For persistent problems, contacting customer service is recommended.

Temperature Control

A low temperature button is available for drying delicate items at a lower temperature, helping to protect sensitive fabrics from heat damage.

Capacity and Load Recommendations

The dryer can handle a full load of up to 6 kg for cotton fabrics, but only up to 3 kg for synthetic materials. It is important to avoid overloading to ensure efficient drying.

Maintenance

To ensure optimal performance, the fluff filter should be cleaned after each drying cycle. This helps maintain air circulation and prevents overheating.

Technical Specifications

The dryer's dimensions are 85x60x57 cm, with an empty weight of approximately 32 kg. It is designed for safe and efficient drying but requires proper installation and maintenance.

Maintenance

Check out our tips to prevent many common issues and extend the life of your AEG Dryer.

Check Voltage Compatibility

Before starting the appliance, ensure that the rated voltage and the type of current indicated on the rating plate correspond to those in the installation location.

Regular Maintenance

Always have repairs and maintenance carried out by qualified personnel. Use only genuine AEG spare parts to ensure the appliance functions correctly.

Clean Lint Filter

Clean the lint filter after each drying cycle to ensure free circulation of air during the drying cycle. This helps in maintaining optimal drying performance.

Avoid Overloading

Do not overload the dryer. Select the appropriate drying programme based on the quantity and type of laundry to achieve satisfactory drying results.

Safety Precautions

Unplug the appliance before carrying out any cleaning or maintenance operations. Ensure the appliance is levelled and not installed on a thick pile carpet to allow proper air circulation.

)

tech specs

Need more info? Please have a look at the tech specs of the watch. We’ve used Latest technology & quality materials

Dimensions

  • Height x Width x Depth: 85x60x57 cm
  • Depth with the door open: 107 cm
  • Height adjustment: 6 mm
  • Empty weight: 32 kg approx.

Performance

  • Load (maximum): 6 kg
  • Energy consumption (Cotton store dry, 1000 rpm): 3.3 kWh
  • Energy consumption (Cotton iron dry, 1000 rpm): 2.6 kWh
  • Energy consumption (Mixed fabrics store dry, 1200 rpm): 1.35 kWh

Functionality

  • Type: Vented Tumble Dryer
  • Control panel: Programme chart/Selector dial
  • Drying options: Low temperature button for delicate items
  • Programme duration (Cotton store dry): 112 minutes
  • Programme duration (Cotton iron dry): 89 minutes
  • Programme duration (Mixed fabrics store dry): 52 minutes

Installation and Safety

  • Permissible ambient temperature: +5°C to +35°C
  • Safety compliance: Complies with EC directives 73/23/EEC and 89/336/EEC
  • Installation requirements: Must not be installed in room below 0°C or above 35°C

AEG T37400 Vented Tumble Dryer

The AEG T37400 vented tumble dryer is a sophisticated appliance designed for efficient and reliable drying of your laundry. With a maximum load capacity of 6 kg, this dryer is perfectly suited for both small and medium-sized households. Measuring 85x60x57 cm, it offers a compact profile that fits seamlessly into your laundry space, even accommodating installations where space is a premium. The AEG T37400 is engineered with multiple drying programs, allowing you to select the perfect setting for cotton, synthetics, and delicate fabrics, ensuring your clothes receive the gentle care they deserve. The user-friendly control panel features an intuitive program selector and essential options like the low temperature setting, which is ideal for delicate items. Its robust build and efficient drying cycles, along with a focus on energy conservation, make it a smart choice for those seeking a reliable and durable dryer.